Product Description
1. A versatile, electrically heated sterilizer under saturated steam of Adjustable pressure of 10 to 20 psi.
2. Double walled construction with boiler & steam jacket made of thick stainless steel 304 grade and gap is filled with high grade glass wool to bring the temperature loss to a minimal level.
3. The outer chamber is made out of thick Stainless steel 304 grade.
4. Hydraulic die pressed lid is made of thick stainless steel 304 grade plate (joint less) and can be sealed by a joint less silicon rubber gasket on rim of the cover.
5. The autoclave chamber is hydrostatically tested at 1.5 times of its working pressure.
6. Provided with stainless steel dial pressure gauge with dual range dial display in KPA and PSI, air/ steam release cock, spring loaded safety valve adjustable to any required point from 10 psi to 20 psi with accuracy
+ 3 psi.
7. A drain cock (Manually open-able valve for exhaust) has also been provided. A double safety valve has also been provided along with inlet.
8. Supplied complete but without dressing bins.
9. Fitted with solenoid valve for purging the air and automatically exhaust the steam from chamber after cycle completion.
10. Able to set the temperature up to 121C to 134C with accuracy of 0.1C
11. Keep the last cycle in the memory in case of power failure or switched off.
12. In case of sensor failure, controller display will show sensor open.
13. It will give Audio/Visual Alarm for cycle completion.
14. To work on 220-240V AC, 50Hz.
Fitted with :-
(a) Low Water Cut off.
(b) Pressure Control Switch.
(c) Microprocessor PID Temperature Controller-cum-indicator with timer (1 min to 999 mins.)
(d) Radial locking and paddle lifting and handle molded from industrial plastic.
(e) With Auto Purging and Evacuation
Chamber Size: 550 x 750mm
Capacity: 187 ltrs
Load: 4.0 + 1.0 KW